PE WAX DEWATERING PROCESS

The dewatering process for PE wax involves removing any water that may be present in the wax. Here is a general overview of the process:

Preheat the PE wax: The wax must heat to a temperature above its melting point in order to make it more fluid and easier to work with.
Filter the wax: The wax is then filtered through a mesh screen to remove any solid impurities that may be present.
Centrifugation: The filtered wax is then subjected to centrifugation in order to separate the water from the wax. This is done by spinning the mixture at high speeds, which causes the water to separate from the wax due to the difference in density.
Decantation: After centrifugation, the wax is allowed to settle, and the water is decanted off the top.
Drying: The wax is then dried to remove any remaining water. This can be done by heating the wax in a vacuum oven or by passing it through a desiccant bed.
Quality control: Finally, the dried wax is checked for moisture content to ensure that it meets the desired specifications.
It is important to note that the exact process for dewatering PE wax may vary depending on the specific application and requirements of the wax.