FacebookLinkedinInstagramWhatsAppWhatsAppWechatWechatYouTube
Dubai: +97142394426 | Turkey: +905366417318|info@petroacc.com

OXIDIZED BITUMEN 85/25

//OXIDIZED BITUMEN 85/25
OXIDIZED BITUMEN 85/25 2023-07-02T22:19:25+00:00

Project Description

  • Oxidized Bitumen 85/25

Oxidized Bitumen 85/25 would be one of the main bitumen products of PETRO-ACC that is used for Varnish and Bitumen coating and Asphalt sheets. this grade of Bitumen has higher penetration and lower softening point and we are exporting this grade to countries that have temperate weather.

Name Oxidized Bitumen 85/25
Manufacturer PETRO-ACC
Made By Aras Petrochemical Company
Product Code R 85/25
WHATSAPP
Contact Supplier
MSDS
FEATURES
SPECIFICATION
NOTES

OXIDIZED BITUMEN 85/25 MSDS

Table scrolling horizontally

Material Safety Data Sheet of Oxidized Bitumen 82/25
Product Name Blown Bitumen 85/25
EC NO 265-196-4
CAS# 64742–93–4
Color: Black Brown
 Odor: the characteristic odor of bituminous products
 Odor Threshold -ppm: NA
 pH: NA
Boiling point °C: NA
Hazards Identification
  • resulting from
    physicochemical properties:  Not classified
  • for humans: Not classified
    In normal usage conditions, the product is hot. It may cause burns and emits vapors.
    When working with hot bitumen any contact with vapors must be avoided. In case of
    prolonged storage in closed containers, hydrogen sulfide may be released from
    bitumen, with concentration reaching hazardous levels.
  • for the environment: Not classified
    In normal usage conditions, it presents no hazard to aqueous and terrestrial organisms.
    However, in the case of building and insulation works it is necessary to heat up the
    product, which causes the release of vapors and their emission into the atmosphere.
First Aid Measures
  • Inhalation:
    Immediately move the affected person to fresh air, place the person in a lying position, and loosen the clothes; if the person is not breathing, give artificial respiration; if no heartbeat is detected, apply external cardiac massage combined with artificial respiration using a respirator, cover the affected person, ensure a calm atmosphere; do not administer any fluids to unconscious persons and persons with disturbance of consciousness. Transport the affected person in a recovery position.
  • Skin contact:
    Cool the burn area as quickly as possible to reduce further heat-related injuries. Cool the burn area with cold
    running water for at least 10 minutes. Avoid excessive cooling of the body. Do not attempt to remove
    bitumen from the burn area. Upon cooling down, bitumen forms a waterproof, sterile layer on the burn
    surface, protecting it from drying. Polluted clothing may be taken off, provided that it has not stuck to the skin.
  • Eye contact:
    Flush thoroughly with a slow stream of potable running water for at least 15 minutes with eyelids retracted,
    remove contact lenses, do not wipe the eyes, and place a sterile, loose dressing on the eyes; consult an ophthalmologist.
  • Ingestion:
    Do not induce vomiting as the product may get into the respiratory tract.
    Do not administer any oral medication. If no improvement is observed, seek medical assistance.
  • 4.2. Most important symptoms and effects, both acute and delayed
    Not specified.
  • 4.3. Indication of any immediate medical attention and special treatment needed
    In case of accidental contact of hot bitumen with skin, do not attempt to remove the bitumen. In each of the
    cases listed above, if the symptoms persist, seek medical attention immediately or take the affected person to
    the hospital, showing the product packaging or label.
Fire-Fighting Measures
  • 5.1. Extinguishing media
    Suitable extinguishing media: Carbon dioxide, dry chemical, expansion foam, sand, diffused water currents,
    extinguishing steam.
    Unsuitable extinguishing media: Do not use dense water streams on the surface of molten bitumen
    due to the hazard of the violent splatter of hot bitumen. Water may be used only to cool down hot surfaces.
  • 5.2. Special hazards arising from the substance or mixture Sticking of hot bitumen to body and clothing. Foaming and splatter occur when the hot product has
    contact with water. During a fire, released gases and vapors are heavier than air and can collect in depressions,
    spread just above the ground within a certain distance from the source of fire, and present a new combustion
    hazard.
    As a result of fire, the following compounds are formed: carbon monoxide, a compound mixture of bitumen
    millings, and – depending on composition – small amounts of sulfur oxides, nitric oxides, and metallic oxide
    fumes.
  • 5.3. Advice for fire-fighters
    Small fires should be extinguished with sand, a dry powder extinguisher, or a carbon dioxide extinguisher; large
    The fire should be extinguished with expandable foam and diffused water currents.
    Persons participating in fire extinguishing operations should be trained, and wear a full set of anti-static
    protective clothing and equipment isolating the respiratory tract.

Table scrolling horizontally

OXIDIZED BITUMEN 85/25 FEATURES 

Oxidized Bitumen 85/25 Technical Details

This grade of Bitumen has higher penetration Although its softening point is lower than grade 90/15 In addition to penetration testing, there are tests used to determine Oxidized bitumen 85/25, including viscosity, shape, and heat loss, and flash point. and the most important items are penetration and softening point.

According to the ASTM D36 method, the softening point of this grade of bitumen is between 80 and 90 ° C and the flash point is 225 ° C.

Oxidized Bitumen 85/25 Applications 

This type of bitumen is used for Varnish, Waterproof roofing membranes, coating and insulation, Asphalt paving, and many other projects in different regions.

Oxidized Bitumen 85/25 Formulation

Oxidized Bitumen 85/25 is semi-solid Bitumen known by some formula according to application in industries such as:

Elementally, it contains from 90% carbon and around 7% hydrogen, and other chemical contents are up to 1% sulfur, 1% nitrogen, 1% oxygen, and 2000ppm metals.

Bitumen Products are composed mainly of highly condensed polycyclic aromatic hydrocarbons.

Oxidized Bitumen 85/25 Packing

Packing of this type of bitumen would be 25 kg poly bags or 25 kg carton boxes with pallets or without pallets.

OXIDIZED BITUMEN 85/25 SPECIFICATION 

SPECIFICATION TEST METHOD A.S.T.M.
PENETRATION AT 25 DEG C 20-30 D.5
SOFTENING POINT DEG C 80-90 D.36
DUCTILITY AT 25 DEG C CMS 3 MIN D.113
LOSS ON HEATING PCT WT 0.2 MAX D.6
FLASH POINT DEG C 225 MIN D.92
SOLUBILITY IN CS2 PCT WT 99 MIN D.4

 NOTES

Related Products

Leave A Comment

Petro-Acc

Aras Petrochemical Company would be a Global Petrochemical company which is manufacturer and Supplier of Petroleum Products and Petrochemical products such as Bitumen, Oxidized Bitumen, Gilsonite, Caustic soda flake, PE WAX, LABSA 96% and some other products as raw material in different cases with deep industrial experiences.

More Info

Turkey Company

Address:
Unite 9, 2th Floor, Sinpas Tower 2, Altinoran, Galip Erdem St, Turan Gunesh St, Ankara, Turkey.

Working Hours:
Monday - Saturday: 9AM – 5PM
Saturday: 9AM – 2PM
Phone: +903125148323
Fax: +903125148813
Cell: +905366417318
Email: info@petroacc.com

Dubai Company

Address:
Unite 2405, 24th Floor, The Burlington Tower, Business Bay, Dubai, UAE

Working Hours:
Monday - Friday: 9AM – 5PM
Saturday: 9AM – 2PM
Phone: +97142394426
Cell: +971569583287
Email: info@petroacc.com
Open WhatsApp
Aras Petrochemical WhatsApp
Hello
Contact us on WhatsApp